1
1
1
1
1
2
Physicomechanical Properties of Porous Materials by Spark Plasma Sintering Yayın Yeri:Critical Reviews in Solid State and Materials Sciences , 2019
1
Uluslararası Dergilerde Yayınlanan Makalelerim
Pressureless Spark Plasma Sintering: A Perspective from Conventional Sintering to Accelerated Sintering Without Pressure Yayın Yeri:Powder Metallurgy and Metal Ceramics , 2019
2
Microstructure characterizatIon and quantitative analysis of copper alloy matrix composites reinforced with WC-xNi powders prepared by Spontaneous Infiltration Yayın Yeri:Journal of Mining and Metallurgy Section B-Metallurgy , 2018
3
Failure analysis of wire-breaks in aluminum conductor production and investigation of early failure reasons for transmission line Yayın Yeri:Engineering Failure Analysis , 2018
4
Production and mechanical properties of Ti-5Al-2.5Fe-xCu lloys for biomedical applications Yayın Yeri:Biomedical Materials , 2018
5
Spark plasma sintering versus hot pressing - densification, bending strength, microstructure, and tribological properties of Ti5Al2.5Fe alloys Yayın Yeri:Powder Metallurgy , 2018
7
Mechanical properties of hypoeutectic Al Ni alloys with Al3Ni intermetallics Yayın Yeri:Materials Testing , 2016
8
Enhanced surface properties of iron by in situ hard nickel coating Yayın Yeri:Materials Testing , 2016
9
Titanium-304L Stainless Steel Joining by Powder Metallurgical Uniaxial Pressing under Vacuum Conditions Yayın Yeri:Acta Physica Polonica A , 2018
6
Production of porous Ti5Al2 5Fe alloy via pressureless spark plasma sintering Yayın Yeri:Journal of Alloys and Compounds , 2016
10
In Situ Aluminum Alloy Coating on Magnesium by Hot Pressing Yayın Yeri:Acta Metallurgica Sinica (English Letters) , 2015
11
Characterisation of nickel alloy powders processed by spark plasma sintering Yayın Yeri:Powder Metallurgy , 2014
12
Investigation of corrosion and mechanical properties of Al Cu SiC xNi composite alloys Yayın Yeri:Materials & Design , 2014
13
Production and characterization of Al xNi in situ composites using hot pressing Yayın Yeri:Journal of Mining and Metallurgy, Section B: Metallurgy , 2014
14
Effect of heat treatment conditions on microstructure and wear behaviour of Al4Cu2Ni2Mg alloy Yayın Yeri:Transactions of Nonferrous Metals Society of China , 2013
17
Effect of heat treatment on erosive wear behaviour of Ti6Al4V alloy Yayın Yeri:Materials Science and Technology , 2013
16
Effect of heat treatment on the tribological properties of Al Cu Mg nanoSiC composites Yayın Yeri:Materials & Design , 2013
18
Sintering and microstructure characteristics of 42CrMo4 steel processed by spark plasma sintering Yayın Yeri:Metals and Materials International , 2013
15
Effect of nickel on microstructure and wear behaviour of pure aluminium against steel and alumina counterfaces Yayın Yeri:International Journal of Cast Metals Research , 2013
19
Comparative evaluation of densification and grain size of ZnO powder compacts during microwave and pressureless spark plasma sintering Yayın Yeri:Advances in Applied Ceramics , 2012
20
Solidification characteristics of atomized AlCu4Mg1 SiC composite powders,Yayın Yeri:Journal of Mining and Metallurgy, Section B: Metallurgy , 2012
21
Mechanical and wear properties of pre alloyed molybdenum P M steels with nickel addition Yayın Yeri:Journal of Mining and Metallurgy, Section B: Metallurgy , 2012
22
Microstructural investigation of as cast and PREP atomised Ti 6Al 4V alloy Yayın Yeri:Powder Metallurgy , 2011
23
Effect of Nickel Addition and Porosity on Fracture Behaviour of Molybdenum Alloyed Powder Metallurgical Steel Yayın Yeri:Materials Testing , 2010
24
Sintering Properties of Mechanically Alloyed Ti-5Al-2.5 Fe Yayın Yeri:International Journal of Materials and Metallurgical Engineering , 2017
25
Tribological study of copper alloy-based composites reinforced with WC-W powders prepared by the spontaneous infiltration process of the loose powder Yayın Yeri:Int. Journal for science, technics and innovations for the industry , 2017
26
Consolidation of Al-nanoSiC Composites by Spark Plasma Sintering Yayın Yeri:International Journal of Materials, Mechanics and Manufacturing , 2016
27
Macro and microexaminations on titanium based implant materials Relation of porosity distribution connective tissue Yayın Yeri:Artificial Organs , 2009
28
Sintering Properties of Mechanically Alloyed Ti-5Al-2.5 Fe Yayın Yeri:International Journal of Materials and Metallurgical Engineering , 2017
29
Macro and Tribological study of copper alloy-based composites reinforced with WC-C powders prepared by the spontaneous infiltration process of teh loose powder Yayın Yeri:Int. Journal for science, technics and innovations for the industry , 2017
30
Consolidation of Al-nanoSiC Composites by Spark Plasma Sintering Yayın Yeri:International Journal of Materials, Mechanics and Manufacturing , 2016
31
Macro and microexaminations on titanium based implant materials Relation of porosity distribution connective tissue Yayın Yeri:Artifical Organs, 2009
32
Effect of nickel addition and porosity on fracture behaviour of Mo alloyed powder metallurgical steel Yayın Yeri: Materials Testing, 2010
33